The responsibility of a writer to produce reader-friendly documents extends to layout, design, and organizational elements surrounding the words themselves. If an email or report were simply a wall of undifferentiated text running for several screens or pages, any reader would be daunted by the prospect of having to scale that wall. Fortunately, writers can use document templates that make those design choices for them with established styles so that writing a document becomes a matter of just filling in the blanks; if you work for a company that uses templates for certain documents, of course you will use them also for consistency and your own convenience. Even without templates, however, you can use several techniques to help guide your readers’ eyes across the page or screen to easily find what they’re looking for. Rather than being optional nice-to-haves, such techniques are crucially important to how well your document is received.

2.4.1 Formatting Titles

Almost every document that exists as a standalone unit must have a title that accurately represents its contents in a nutshell. It’s the first thing a reader looks for to understand what a document is all about and should thus be easily found centred at the top of the first page of any small document, and prominently placed on the cover of larger documents. Though some documents represent exceptions to this rule (e.g., business letters lack titles, and many lack subject lines), any document that brings with it the expectation of a title but omits it is incomplete, and readers might not know what to make of it (or would waste time figuring that out). Even emails and memos have titles in the form of subject lines.

2.4.2: Creating Headings and Subheadings

After the main title of a document, using headings and subheadings as titles for sections and subsections helps guide the reader around a document’s breakdown of topics. Especially in reports, headings and subheadings that stand out in bold typeface flush (or close) to the left margin and follow a consistent numbering system, exactly as you see in this textbook, help a busy reader quickly locate any specific content they seek. Even a routine email that covers a topic in so much detail that it could be internally divided—without being so big that its content should just go into a document attachment—would benefit from bolded headings. Just like titles, headings and subheadings must be properly phrased and capitalized like main titles (see 2.4.1 above).

When using a word processor such as Microsoft Word, you can achieve additional functionality by using “true headings.” From the Home menu tool ribbon, heading styles are available as options in the Styles section. If you prefer to design your own styles of headings, you can click on the downward triangle at the bottom right of the style examples field and select “Create a Style.” Doing this allows you to see your entire document at a glance on the left and quickly jump to any section you wish by clicking on the Navigation Pane checkbox in the Show section of the View menu tool ribbon (or Alt + w, k), then clicking on the heading for the section you want. This is especially useful in larger documents like reports. Additionally, using such headings makes your document accessible to audiences with assistive technologies such as screen readers (see §2.4.9 below on AODA compliance).

2.4.3: Choosing Fonts

Font selection is an important consideration because it determines how the audience will receive a document. Font involves decisions concerning the style of type, size, and even colour. Consider the following:

Font Type

Writers considering typeface must choose between two major style categories depending on how they would like to accommodate their reader. Serif fonts like Times New Roman and Garamond have little perpendicular crossline “feet” or “hands” at the ends of letter strokes, as well as variable thickness in the strokes themselves depending on their horizontal/vertical or curving position, which altogether help readers distinguish between similar letters or combinations of letters, such as m and rn, which almost look like the same letter in a non-serif font. Serif fonts are ideal for printed documents, especially those with smallish font sizes such as newspapers. Without serifs, sans-serif fonts like Arial (the one used in this textbook) or Verdana achieve a more clean and modern look, especially on computer screens where serif fonts appear to whither away at the thin part of the stroke and are thus harder to read. In the appropriate format, all the fonts mentioned above make a document look respectable. Comic Sans, on the other hand, is appropriate for documents aimed at children, but undermines the credibility of any professional document, such as when the unfortunate choice to use it when reporting CERN particle physics discoveries became more newsworthy than the discoveries themselves (CBC, 2012).

Anticipate that audiences might care about font choices, especially if the font clashes with the content like the example above. To anyone who considers the effects that fonts have on an audience, even going with the Microsoft Word default font of Calibri has its dangers because it comes off looking lazy, being the non-choice of those who never consider the importance of font. At the other extreme, digging around for and using exotic fonts for a document is risky because they can look flakey, such as Papyrus or Copperplate (Butterick, 2013). Even if they look nice, however, the receiver opening the document on the other end may not have that font in their word processor program, requiring that program to substitute it with another font, which may look worse or mangle layouts arranged around that font. The safe bet, then, is always to go with familiar, respectable-looking serif or sans serif fonts like those identified at the top of this subsection.

Font Size

Size is another important consideration because readers depend on text being an ideal size for readability and are frustrated by font sizes that are bigger or smaller than that. In a standard written document, for instance, a 12-point Arial or Times New Roman is ideal. If the MS Word default size when you open a blank document is 11-point, it’s worth increasing it for the sake of those who have slight visual impairment. Increasing the size much past 12-point has a similar effect as using the Comic Sans font type: it makes your document appear to be targeting an audience of children. Of course, situations where you want to increase the font size abound, such as for titles on title pages so that the eye is drawn immediately to them, and any time readers are required to read at a distance, such as posters on a notice board or presentation slides. The ideal font size for bullet points in a PowerPoint is in the 30- to 35-point range, whereas a 12-point font will appear microscopic on a projector screen, if not invisible, from across the room.

Occasions for going smaller with your font size include footnotes in a report or source credits under images in a document or PowerPoint presentation. Decreasing font size to 8-point merely to get all your text to fit into a one-page résumé, however, would undermine the document’s purpose because, by frustrating the hiring manager trying to read it, it runs the risk of prompting them to just dump it in the shredder and move on to the next (hopefully reader-friendly) résumé. In such cases, choosing the right font size becomes a major life decision. Whatever the situation, strike a balance between meeting the needs of the reader to see the text and design considerations.

Font Colour

A choice of colour may also enter into document design considerations, in which case, again, the needs of the reader must be accommodated. Used appropriately, a touch of colour can draw the eye to important text. Colouring your name red at the top of your résumé is effective if few or no other elements in the document are so coloured because your name is essentially the title of your document. Likewise, colouring the title of other documents is effective if there are no expectations of doing otherwise (some style guidelines forbid colour).

Any use of colour for text must be high-contrast enough to be readable. The gold standard for high-contrast readability is black text on a white background. Grey-on-white, on the other hand, sacrifices readability for stylishness depending on how light the shade of grey is. A light-yellow text on a white background is nearly impossible to read. In all cases, the readability of the text should be considered not just for those with perfect vision, but especially for those who find themselves anywhere on the spectrum of visual impairment (see §2.4.9 on accessibility below). For this reason, colour should always be used to enhance a document that is already perfectly organized without it; never use colour-coding alone as an organizing principle in a document read by anyone other than you because you can never be sure if some readers will be colour blind or have other visual impairments that render that colour coding useless as a cause for confusion.

Boldface, Italics, and Underlining

Boldface, italics, and underlining serve various purposes in focusing audience attention on certain words. Boldface type is especially helpful in directing audience eyes towards titles, headings, and keywords as you can see at the beginning of this paragraph and throughout this textbook. Highlighting in this way is especially helpful to anyone who is visually impaired in any degree. Of course, overusing boldface undermines its impact, so it should be used sparingly and strategically. Likewise, italics and underlining have very specific purposes as well.

2.4.4: Line Spacing Considerations

Single-spaced lines are common to most documents because they accommodate the reader’s need to dart quickly to the next line to continue reading a sentence. The gap between 1.0-spaced lines is just enough to clearly separate one line from another so the hanging elements at the bottom of letters like j and g don’t interfere with the tops of uppercase letters on the line below. Some documents such as academic manuscripts are double-spaced to give readers, who are usually the instructors or teaching assistants grading them, enough space to write comments and editorial marks between the lines. Because doubling the line spacing also doubles the number of pages in a print version, avoid double-spacing documents for audiences who don’t explicitly require it.

Frustratingly, some word processors such as Microsoft Word open blank pages with line spacing values other than single (1.0) spacing as their default setting, such as 1.08 or 1.15. In such cases, a couple of adjustments are necessary if you want to single-space a document you’re writing from scratch. Make these adjustments as soon as you open a blank page or by highlighting all (ctrl. + a) if you’ve already started. In MS Word’s Home menu:

1. Click on the Line and Paragraph Spacing icon that has four lines representing text with two blue arrows on its left side, one pointing up and one down, in the Paragraph section of the Home menu ribbon (or just type the Alt + h, k keys).
   

   

2. Select 1.0 from the dropdown menu or Line Spacing Options from the same to open the Paragraph control panel and select Single from the Line Spacing dropdown menu in the Spacing section.
3. Perform the same two steps as above to get the Line and Paragraph Spacing dropdown menu and select Remove Space After Paragraph or, from the Paragraph control panel, click on the “Don’t add space between paragraphs of the same style” checkbox and the Okay button at the bottom to apply the style.

The third action above prevents MS Word from adding a full line of space every time you hit Enter at the end of a line. When typing address lines for a letter without the “Don’t add space” checkbox ticked, for instance, the default line spacing will continue to look like double spacing even if you set the line spacing to single.

Justification should ideally be left as the default left-aligned or “Left-justified / ragged right.” This means that all lines are flush to the left margin and the lines end wherever the last full word fits before the right margin sends (or “wraps”) the next word down to the next line, making each line vary in length so the right margin looks “ragged,” as you can see throughout this textbook. This is usually preferable to “justifying” both the left and right edges of the text so that they align perfectly along both the left and right margins, as in the example below. While this may look clean, like the columns in newspapers, this look is achieved by adding space between the words within each line, and since every line varies in length without justification, every line with it will vary in the amount of space added between words. Some lines that would be short without justification look awkward with it because the space between some words is greater than the span of small words.

To fix the “hockey teeth” gaps that can result from justification such as what you see in the example above, turn on hyphenation in MS Word via the Layout tool ribbon: select Automatic in the Hyphenation dropdown menu in the Page Setup section. This automatically adds hyphens between syllables of long words whose size and position at the end of a line would otherwise send them entirely to the beginning of the next line, decreasing the number of words in the line above and increasing the gap between each. If working in a company document template with justification, keep the justification throughout to be stylistically consistent with other documents produced in that template and ensure that the hyphenation is turned on (unlike this paragraph). Otherwise, left-aligned text is perfectly fine and may even help readers find their place if they lose it momentarily compared with the uniform brick-wall effect of justified text seen here.

2.4.5: Using Lists

Another technique that helps the reader skim and easily find sought-after content is numbered or bulleted lists for a series of discreet but related items. Whether you use numbered or bulleted lists depends on your organizing principle:

You’ve seen numbered and bulleted lists used throughout this textbook (e.g., the two bulleted lists immediately above). Whichever list type you use, ensure each has the following:

• A sentence or phrase introducing and explaining the list and ending with a colon before delivering the list immediately below it, as you can see in the sentence that introduces this list;
• Capitalization of the first letter in each point OR no capitalization for any of the items (except if they are proper names);
• Periods ending each point only if it is a complete sentence on its own, whether it be in the declarative, imperative, or any other mood; a list of nouns or noun phrases, on the other hand, doesn’t end in periods (semicolons can be used in this case — as in the list you are reading right now — for all list items except the last one, which should end in a period);
• Parallelism in the sense that each point in a list follows the same grammatical pattern, such as only full sentences, only noun phrases, or only verb phrases (or imperative sentences); for instance, each point in the three bulleted lists in this section (including the present one) is a noun phrase (i.e., it begins with a noun) and the numbered list in §2.4.5 above, as a step-by-step procedure, is a sequence of imperative sentences (i.e., each begins with a verb: “Click,” “Select,” “Perform”). The need for parallelism extends also to lists within a sentence.

2.4.6: Choosing Visual Aids

The cliché that a picture is worth a thousand words holds true because images are excellent aids to understanding when placed near the messages they illustrate. Just as the visual elements in this textbook support and reinforce the content, such as those in §2.2.4 above, so photos, graphics, charts, and graphs provide readers something that can be understood and remembered at a glance—as long as those visuals are used appropriately. Of course, the main criterion for usability is if the image helps the reader understand the text better. If the image is complementary, it can only help. If it is unnecessary, confusing, or contradicts the text, however, the image isn’t worth the time and effort it takes to add it to your document.

The ideal size depends on the resolution, detail of the content, relative importance, and the use to which the document will be put. The following guidelines help ensure that the images you use will meet aesthetic, design, technical, and legal expectations:

• Aesthetic guidelines:
  • Choose images that look like they were produced by professional photographers, illustrators, or graphic designers—the sort you would see in a magazine or professional industry website.
  • Professionals usually produce images with a limited palette of colours that work well together.
  • Use images that are in focus and well-framed with the central image clearly visible rather than too far in the background or so close that important aspects are cropped out.
• Design guidelines:
  • An image or graphic that is crucial to the reader’s understanding and is highly detailed really deserves to stretch across the text block from margin to margin.
  • An image that is more ornamental and relatively simple can be inset within the text either on the left or right margin, or centred on the page without text on either side.
  • Important images, especially those labelled as figures, must be placed as near as possible to the text they support and even referred to in the text (“See Figure 2 for an illustration of . . .”)
  • Ensure that the text and corresponding image aren’t separated by a page break if the text is close to the top or bottom of the page. The reader’s eye must be able to move between the image and corresponding text in the same field of view to seal their understanding.

• Technical guidelines:
  • Screen resolution must be at least 72dpi (dots per inch), the internet standard; anything less than 72 may appear pixelated even on the screen, especially if maximized in size across the page.
  • Images in documents that will be printed should be 300dpi to avoid appearing pixelated on paper.
  • Preferred image file types include JPEG (.jpg) and PNG (.png). The latter includes the possibility of contouring so that the image doesn’t necessarily have to be a square or rectangle. You can make a PNG image file of your handwritten and scanned signature, for instance, by erasing the white background around the pen strokes in Photoshop and saving the image as a PNG. That way, you can drag and drop your signature onto a signature line in an electronic document and it won’t block out the line underneath if your signature typically sprawls out over lines.

• Legal guidelines:
  • To stay on the right side of copyright legislation, searching online for images that are free to use is easy by including licensing status in an advanced Google Image search. From the Google Images search screen:
    1. Click on the Settings spring-up menu at the bottom right.
    2. Select Advanced Search.
    3. Scroll down and click on the “usage rights” dropdown menu at the bottom.
    4. Select “free to use or share” or whatever licensing status suits your purposes.
  • Otherwise, you can acquire the right to use images for commercial purposes by purchasing them from stock photo vendors such as Getty Images, Adobe Stock, or Shutterstock.

With modern word processors, placing an image is as easy as dragging and dropping the image file from a folder into a document (or copying and pasting). Sometimes you will need to be a little craftier with capturing images, however. For instance, if you need to capture a still from a YouTube video to use as an image, you can pause the video at the moment you want to capture and use your computer’s screen-capturing program to get the image.

• On a Windows-based computer:
  1. Open the included Snipping Tool (Microsoft Support, 2021) to turn the cursor into crosshairs.
     • Note: in Windows 10 , the Snipping Tool may be replaced with the Snip & Sketch app.  Please see Microsoft’s help and support site for how to take and annotate additional screenshots on Windows 10.
  2. Click and drag the crosshairs to select the desired portion of the screen for capturing; when you release the cursor, the captured image will open immediately in the clipboard. Ensure that you’ve included only the elements necessary, rather than the whole screen, plus a short span of margin on each side.
  3. Save the image in a folder from the clipboard or add it directly to the document by switching immediately to the document window (Alt + tab) and pasting it (ctrl. + v) wherever you’ve placed your cursor.
• On a Mac, use Shift + Command + 4 and use the crosshairs to select the desired portion of the screen (Apple Support, 2020).

Once your image is in your document, use the layout options to place it where appropriate. Clicking on it may produce a layout icon near the top right that you can click on to open the dropdown menu (alternatively, you can right-click on the image and select the Wrap Text option from the dropdown menu). The default setting left-justifies the image and displaces the text around where you put it, but other layout options allow you to place it elsewhere on the page so that your text wraps around it (“Square,” “Tight,” or “Through”) or so that text doesn’t move around it at all (“Behind” or “In front of text”), which gives you the freedom to move the image anywhere.

2.4.7: Using Interactive Elements

Another aid to understanding that can benefit readers of an online or electronic document is a weblink that provides them with the option of accessing other online media. Hyperlinking is easy in modern word processors and online applications such as websites and email simply by highlighting text or clicking on an image and activating the hyperlinking feature. Press the control and k keys simultaneously (Ctrl + k), paste the web address into the URL field (copy it by clicking on the web address bar or keying Alt + d, then Ctrl + c), and hit the Okay button (Microsoft Office Support, 2021). Users prefer links that open new tabs in their browser rather than take them away entirely, so seek out that option when hyperlinking. By doing this for an image of a YouTube video screenshot, for instance, you enable readers of a document (including a PowerPoint presentation) to link directly to that video in YouTube rather than embed a large video file in your document. You can additionally link to other areas within a document, as the document version of this textbook does with links to various sections like the one in the previous sentence.

2.4.8: Balancing Text and Whitespace

Another consideration that helps readers find their way around a page is the balance of text and whitespace, which is simply a gap unoccupied by text or graphic elements. The enemy of readability is a wall of text that squeezes out any whitespace, whereas a well-designed document uses whitespace to usher the reader’s eyes towards units of text. Whitespace margins frame the text in a document, for instance, as well as give readers something to hold on to so that they don’t cover up any text with their thumbs. Margins should be 3 cm or 1″ (2.54 cm), which are the default margin sizes in most word processors’ (e.g., Microsoft Word’s) blank 8.5″x11″ document. Margins also focus attention on the text itself, which makes any crowding of the margins an offense to good design. An attempt to cram more information into a one-page résumé by edging further and further into the margins, for instance, might bother the hiring manager, who might take your sacrifice of the document’s readability as a sign of selfishness—that you place your own needs above that of your audience, which suggests you would do the same to the customers and management if it suited you. Reducing the document margins to, say, 2.2 cm might not be noticeable, but generally avoid reducing the margins below 2 cm for any type of workplace document.

2.4.9: Making Accessible, AODA-compliant Documents

The Accessibility for Ontarians with Disabilities Act (2005) sets out guidelines for how workplaces can help people with disabilities, including accommodations that extend to document design. Many of the recommendations covered in the sections throughout §2.4 above, such as font size and colour, are justified as accommodations to people with even mild visual impairment. Someone with colour blindness, for instance, may be confused if you use coloured text alone as an organizing principle, which is why you should use colour only to enhance text readability while using other means of organization such as boldface type (see §2.4.3 above). Not only must you accommodate such individuals, but also those whose severity of impairment requires that they use assistive technologies such as screen readers that convert text to automated voice. The more straightforward your text is presented, as well as formatted with “true headings” that a screen reader can identify as headings, the easier a person with a disability can hear and understand your message when it’s read out by a screen reader.

Once you are done drafting your document, you can begin to check for any accessibility issues and act on them right away. In MS Word, just go to File and, in the Info tab, select the “Check for Issues” button in the Inspect Document section. It will identify accessibility problems in your document as well as suggest fixes (watch the video below for a demonstration). For instance, if you have a photo without alt text, it will prompt you to write a caption by right-clicking on the image, selecting “Edit Alt Text…” from the dropdown menu, and writing a one- or two-sentence description of the image so that users with screen readers will be able to hear a description of the image they can’t see very well or at all.

How to use the Office 365 Accessibility Checker