26 Module 20: Composite Figures — Technical Mathematics

Module 20: Composite Figures

<!– pb_fixme –>

This sunburst pattern is composed of 276 geometric tiles.


You may use a calculator throughout this module as needed.

Many objects have odd shapes made up of simpler shapes. A composite figure is a geometric figure which is formed by—or composed of—two or more basic geometric figures. We will look at a handful of fairly simple examples, but this concept can of course be extended to much more complicated figures.


To find the area of a composite figure, it is generally a good idea to divide it into simpler shapes and either add or subtract their areas as necessary.

Exercises

A floor plan of a room is shown. The room is a 12-foot by 17-foot rectangle, with a 3-foot by 5-foot rectangle cut out of the south side.

1. Determine the amount of molding required to go around the perimeter of the room.

2. Determine the amount of flooring required to cover the entire area.

You may need to figure out some unmarked dimensions.

Exercises

A plan for an irregular parking lot is shown.

3. Calculate the perimeter.

4. Calculate the area.

Sometimes, composite figures involve parts of circles coupled with polygons.

Exercises

A high school is building a track at its athletic fields. The track, which is formed by two straight sides and two semicircles as shown in the plans below, is supposed to have a total length of 400 meters.

5. Determine the distance around the track. Will the track be the right length?

6. After the new track is built, landscapers need to lay sod on the field inside the track. What is the area of the field inside the track?

If we need to determine a fraction or percent out of the whole, we may be able to solve the problem without knowing any actual measurements.

Exercises

A square with a circel inscribed in it; the four regions outside the circle are shaded

7. Circular disks are being cut from squares of sheet metal, with the remainder around the corners being discarded. Assuming that the circles are made as large as possible, what percent of the sheet metal will be discarded?

<!– pb_fixme –>

<!– pb_fixme –>
<!– pb_fixme –>

License

Math Copyright © by sboschman. All Rights Reserved.

Share This Book