11 Groups and Problem Solving

Define the Problem

If you don’t know what the problem is, how can you know you’ve solved it? Defining the problem allows the group to set boundaries of what the problem is and what it is not; and begin to formalize a description or definition of the scope, size, or extent of the challenge the group will address. A problem that is too broadly defined can overwhelm the group. If the problem is too narrowly defined, important information will be missed or ignored.

In the following example, we have a web-based company called Favorites which needs to increase its customer base and ultimately sales. A problem-solving group has been formed, and they start by formulating a working definition of the problem.

• Too Broad: “Sales are off, our numbers are down, and we need more customers.”
• More Precise: “Sales have been slipping incrementally for 6 of the past 9 months and are significantly lower than a seasonally adjusted comparison to last year. Overall this loss represents a 4.5% reduction in sales from the same time last year. However, when we break it down by product category, sales of our non-edible products have seen a modest but steady increase, while sales of edibles account for the drop off and we need to halt the decline.”

Analyze the Problem

Now the group analyzes the problem, trying to gather information and learn more. The problem is complex and requires more than one area of expertise. Why do non- edible products continue selling well? What is it about the edibles that is turning customers off? Let’s meet our problem-solvers at Favorites.

Kevin is responsible for customer resource management. He is involved with the customer from the point of initial contact through purchase and delivery. Most of the interface is automated in the form of an online “basket model,” where photographs and product descriptions are accompanied by “Buy It” buttons. He is available during normal working business hours for live chat and voice interface if needed, and customers are invited to request additional information. Most Favorites customers do not access this service, but Kevin is kept quite busy, as he also handles returns and complaints. Because Kevin believes that superior service retains customers while attracting new ones, he is always interested in better ways to serve the customer. Looking at edibles and non-edibles, he will study the cycle of customer service and see if there are any common points, from the main webpage through the catalog to the purchase process to returns, at which customers abandon the sale. He has existing customer feedback loops with end-of-sale surveys, but most customers decline to take the survey and there is currently no incentive to participate.

Mariah is responsible for products and purchasing. She wants to offer the best products at the lowest price, and to offer new products that are unusual, rare, or exotic. She regularly adds new products to the Favorites catalog and culls underperformers. Right now she has the data on every product and its sales history, but it is a challenge to represent it. She will analyze current sales data and produce a report that specifically identifies how each product, edible and non-edible, is performing. She wants to highlight “winners” and “losers” but also recognizes that today’s “losers” may be the hit of tomorrow. It is hard to predict constantly changing tastes and preferences, but that is part of her job. It’s not all science, and it’s not all art. She has to have an eye for what will catch on tomorrow while continuing to provide what is hot today.

Suri is responsible for data management at Favorites. She gathers, analyzes, and presents information gathered from the supply chain, sales, and marketing. She works with vendors to make sure products are available when needed, makes sales predictions based on past sales history, and assesses the effectiveness of marketing campaigns.

The problem-solving group members already have certain information on hand. They know that customer retention is one contributing factor. Attracting new customers is a constant goal, but they are aware of the well-known principle that it takes more effort to attract new customers than to keep existing ones. Thus, it is important to insure a quality customer service experience for existing customers and encourage them to refer friends. The group needs to determine how to promote this favorable customer behavior.

Another contributing factor seems to be that customers often abandon the shopping cart before completing a purchase, especially when purchasing edibles. The group members need to learn more about why this is happening.

Establish Criteria

Establishing the criteria for a solution is the next step. At this point, information is coming in from diverse perspectives, and each group member has contributed information from their perspective, even though there may be several points of overlap.

He notes that a very small percentage of customers complete the post-sale survey, and the results are far from scientific. He also notes that it appears the interface is not capable of cross-checking inventory to provide immediate information concerning back orders, so that the customer “buys it” only to learn several days later that it was not in stock. This seems to be especially problematic for edible products, because people may tend to order them for special occasions like birthdays and anniversaries. But we don’t really know this for sure because of the low participation in the post-sale survey.

Consider Possible Solutions to the Problem

 The group has listened to each other and now starts to brainstorm ways to address the challenges they have addressed while focusing resources on those solutions that are more likely to produce results.

This scenario allows us to see the problem may have many dimensions, and may have several solutions, but resources can be limited and not every solution is successful. Even though the problem is not immediately resolved, the group problem-solving pattern serves as a useful guide through the problem-solving process.

Life is the sum of all your choices.

–  Albert Camus

Simply put, decision-making is the process of choosing among options and arriving at a position, judgment, or action. It usually answers a “wh-” question—i.e., what, who, where, or when?—or perhaps a “how” question.

A group may, of course, make a decision in order to solve a problem. For instance, a group of students might discover halfway through a project that some of its members are failing to contribute to the required work. They might then decide to develop a written timeline and a set of deadlines for itself if it believes that action will lead them out of their difficulty.

Not every group decision, however, will be in response to a problem. Many decisions relate to routine logistical matters such as when and where to schedule an event or how to reach someone who wasn’t able to make it to a meeting (routine in nature; applicable to fundamental elements and considerations of how an organization or process works).  Thus, decision-making differs from problem-solving.

Any decision-making in a group, even about routine topics, is significant. Why? Because decision-making, like problem-solving, results in a change in a group’s status, posture, or stature. Such change, in turn, requires energy and attention on the part of a group in order for the group to progress easily into a new reality.  Things will be different in the group once a problem has been solved or a decision has been reached, and group members will need to adjust.

Methods of Reaching Decisions

 Research does indicate that groups generate more ideas and make more accurate decisions on matters for which a known preferred  solution  exists,  but  they  also operate more slowly than individuals.  ^[3]Under  time  pressure  and  other  constraints,  some  group  leaders  exercise  their power to make a decision  unilaterally—alone—because they’re willing to sacrifice a degree of accuracy for the sake of speed. Sometimes this behavior turns out to be wise; sometimes it doesn’t.

Assuming that a group determines that it must reach a  decision  together  on  some matter, rather than deferring to the will of a single person, it can proceed according        to several methods. Parker and Hoffman ^[4], along with Hartley and Dawson ^[5], place decision-making procedures in several categories.

Here is a synthesis of their views of how decision-making can take place:

1.  “A plop.”

A group may conduct a discussion in which members express views and identify alternatives but then reach no decision and take no action. When people go their own ways after such a “plop,” things sometimes take care of themselves, and the lack of a decision causes no difficulties. On the other hand, if a group ignores or postpones a decision which really needs attention, its members may confront tougher decisions later—some of which may deal with problems brought about by not addressing a topic when it was at an early stage.

2.  Delegation to an expert.

A group may not be ready to make a decision at a given time, either because it lacks sufficient information or is experiencing unresolved conflict among members with differing views. In such a situation, the group may not want to simply drop the matter and move on. Instead, it may turn to one of its members who everyone feels has the expertise to choose wisely among the alternatives that the group is considering.

5. Consensus.

In consensus decision-making, group members reach a resolution which all of the members can support as being acceptable as a means of accomplishing some mutual goal even though it may not be the preferred choice for everyone. In common use, “consensus” can range in meaning from unanimity to a simple majority vote. In public policy facilitation and multilateral international negotiations, however, the term refers to a general agreement reached after discussions and consultations, usually without voting. “consensus”. (2002). In ^[6]

Consensus should not be confused with unanimity, which means only that no one has explicitly stated objections to a proposal or decision.  Although unanimity can certainly convey an accurate perspective of a group’s views at times, groupthink also often leads to unanimous decisions. Therefore, it’s probably wise to be cautious when a group of diverse people seems to have formed a totally unified bloc with respect to choices among controversial alternatives.

When a consensus decision is reached through full interchange of views and is then adopted in good faith by all parties to a discussion, it can energize and motivate a group. Besides avoiding the win/lose elements intrinsic to voting, it converts each member’s investment in a decision into a stake in preserving and promoting the decision after it has been agreed upon.

Guidelines for Seeking Consensus

How can a group actually go about working toward consensus? Here are some guidelines for the process:

First, be sure everyone knows the definition of consensus and is comfortable with observing them. For many group members, this may mean suspending judgment and trying something they’ve never done before. Remind people that consensus requires a joint dedication to moving forward toward improvement in and by the group.

Second, endeavor to solicit participation by every member of the group. Even the naturally quietest person should be actively “polled” from time to time for his or her perspectives. In fact, it’s a good idea to take special pains to ask for varied viewpoints when discussion seems to be stalled or contentious.

Third, listen honestly and openly to each group member’s viewpoints. Attempt to seek and gather information from others. Do your best to subdue your emotions and your tendency to judge and evaluate.

Fourth, be patient. To reach consensus often takes much more time than voting would. A premature “agreement” reached because people give in to speed things up or avoid conflict is likely later to weaken or fall apart.

Fifth, always look for mutually acceptable ways to make it through challenging circumstances. Don’t resort to chance mechanisms like flipping a coin, and don’t trade decisions arbitrarily just so that things come out equally for people who remain committed to opposing views.

Sixth, resolve gridlock earnestly. Stop and ask, “Have we really identified every possible feasible way that our group might act?” If members of a group simply can’t agree on one alternative, see if they can all find and accept a next-best option. Then be sure to request an explicit statement from them that they are prepared to genuinely commit themselves to that option.

One variation on consensus decision-making calls upon a group’s leader to ask its members, before initiating a discussion, to agree to a deadline and a “safety valve.” The deadline would be a time by which everyone in the group feels they need to have reached a decision. The “safety valve” would be a statement that any member can veto the will of the rest of the group to act in a certain way, but only if he or she takes responsibility for moving the group forward in some other positive direction.

Although consensus entails full participation and assent within a group, it usually can’t be reached without guidance from a leader. One college president we knew was a master at escorting his executive team to consensus. Without coercing or rushing them, he would regularly involve them all in discussions and lead their conversations to a point at which everyone was nodding in agreement, or at least conveying acceptance of a decision. Rather than leaving things at that point, however, the president would generally say, “We seem to have reached a decision to do XYZ. Is there anyone who objects?” Once people had this last opportunity to add further comments of their own, the group could move forward with a sense that it had a common vision in mind.

Consensus decision-making is easiest within groups whose members know and respect each other, whose authority is more or less evenly distributed, and whose basic values are shared. Some charitable and religious groups meet these conditions and have long been able to use consensus decision-making as a matter of principle. The Religious Society of Friends, or Quakers, began using consensus as early as the 17th century. Its affiliated international service agency, the American Friends Service Committee, employs the same approach. The Mennonite Church has also long made use of consensus decision-making.

12.3   Facilitating the Task-Oriented Group

Just as “facile” in English and “fácil” in Spanish mean “easy,” the word “facilitate” itself means “to make something easy” and “group facilitation” consists in easing a group’s growth and progress. Most student, community, and business groups are task-oriented, so we’ll consider here how they can most easily be guided toward accomplishing the tasks they set for themselves. Another section of this book deals specifically with the details of leading meetings, so for now we’ll consider broader questions and principles.

1. Know the group’s members. This means more than just identifying their names and recognizing their faces. If you hope to accomplish anything significant together, you need to be familiar with people’s opinions, their needs, their desires, and their personalities.  Perhaps one member of a group you’re leading is particularly time- conscious, another likes to make jokes, and a third prefers to see concepts represented visually. If you take these propensities into account and respond to them as much as possible, you can draw the best cooperative effort from each of the people. You may want to keep track of who’s done what favors for whom within the group, too. Like it or not, many people operate at least from time to time on the principle that “I’ll scratch your back if you scratch mine.”
2. Weigh task and relationship considerations. The word “equilibristic” is sometimes applied to the actions of athletes and musicians. It refers to a capability to balance differing and sometimes conflicting forces so as to maintain continuous movement in a chosen direction.  Although almost any group has some work to do, and all groups comprise people whose welfare needs to be tended to, the effective facilitator realizes that it’s impossible to emphasize both those elements to the same degree all the time. If people are disgruntled or frustrated, they can’t contribute well to accomplishing a task. Likewise, if people are always contented with one another and their group but can’t focus on getting things done, the group will be unable to attain its objectives. To facilitate a group well, thus, requires that you be equilibristic.
3. Understand and anticipate prevalent features of human psychology. Keep in mind that everyone in a group will perceive what the facilitator does in light of his or her own circumstances and wishes.Recall also  that  everyone  possesses  diverse  and  numerous  capacities for self-justification and self-support. In their book Mistakes were made (but not by me), Carol Tavris and Ellion Aronson referred to studies of married couples’ behavior. They indicated that when husbands and  wives are asked what proportion of the housework they perform, the totals always exceed 100 percent by a large margin.  ^[7] Tavris and Aronson also described the Museum of Tolerance in Los Angeles, which presents visitors with interactive exhibits portraying categories of people about whom many of us harbor   negative preconceptions—including ethnic and racial minorities, obese individuals, people with disabilities, and so on. A video attempts to persuade visitors that they possess prejudices, after which two doors   are offered as an exit. One is marked “Prejudiced” and the other is labeled “Unprejudiced.” The second door is locked, to make the point that all of us are indeed subject to prejudice.
4. Deal well with disruptions. The playwright Paddy Chayevsky wrote that “life is problems.” An effective group facilitator needs to anticipate and skillfully cope with problems as a part of life, whether they’re caused by other people’s behavior or by physical and logistical factors. If you’re an adherent of Theory Y, you probably believe that people enjoy pursuing their goals energetically, in groups or individually. You also probably believe that people prefer to select times and places along the way to relax and recharge. Unfortunately, interruptions often arise in such a way as to make both these aims difficult to achieve. Think about all the unexpected academic, family, and work- related reasons why you and other students you know have found it challenging to “stay the course” toward your personal and collective goals.  A group’s facilitator, thus, needs to make sure that interruptions and disruptions don’t derail it. In fact, he or she might profit from actually celebrating these elements of life, as one Seattle office executive did. According to Dale Turner, the executive’s office had a sign on the wall reading “Don’t be irritated by interruptions. They are your reason for being.” Turner went on to quote the executive as saying “Happily, I have learned how to sit loose in the saddle of life, and I’m not usually disturbed by interruptions. I have made it a habit through the years to leave a stretch factor in my daily schedule. I start early and have tried not to so crowd my day with appointments that I have no time for the unexpected. I have not seen interruptions as an intrusion.” ^[8]
5. Keep returning to the task. You’ve probably been part of a group in which the leader or facilitator had what might be called a divergent, rather than a convergent, personality. Perhaps that person had lots of good ideas but seemed to jump around from topic to topic and chore to chore so much that your head spun and you couldn’t keep track of what was going on. Maybe the person “missed the forest for the trees” because of dwelling excessively on minutia—small and insignificant details. Or perhaps each time you met with the group its facilitator led    a discussion of something valuable and important, but every time it    was a different thing.

Another way to think of how a facilitator should keep bringing the group’s attention back to its tasks relates to the process of meditation. Practitioners of meditation know that people’s minds are naturally active and tend to move readily from subject to subject. When someone is meditating, they say, thoughts will naturally pop into his or her mind. The way to deal with this phenomenon is to regard the thoughts as clouds drifting across the sky. Rather than trying to banish them, the better approach is to allow them to pass by and dissipate, and then to return to serene contemplation.  ^[9]

Above all, a facilitator’s responsibility is to enable members of a group to function together as easily and happily as possible as they pursue their goals. When this happens, the group will achieve a high level of collaboration. In fact, it may rise beyond collaboration to achieve what the author and computer game designer Bernard DeKoven called “[pb_glossary id="573"]coliberation.[/pb_glossary]” In speaking about meetings, he had this to say: “Good meetings aren’t just about work. They’re about fun—keeping people charged up. It’s more than collaboration,  it’s  ‘coliberation’—people  freeing  each other up to think more creatively.”  ^[10]

12.4 Summary

Additional Resources

http://www.deepfun.com/coliberation/: Bernard “Bernie” De Koven’s blog. A source of provocative ideas on why and how to indulge in creative fun as part of a group.

http://bit.ly/PV635method: A YouTube video describing the “6-3-5 method,” which offers an alternative to traditional brainstorming that attempts to draw and expand upon more ideas from a group of six people.